Teledyne DALSA VA2-03-C11-1 Replacement for Genie Series

Product Overview

Teledyne DALSA VA2-03-C11-1 Replacement for Genie Series: Seamless Transition & Compatible Upgrade

The Teledyne DALSA VA2-03-C11-1 is a 0.3MP Color CameraLink area scan camera from the Genie Series platform, widely deployed in industrial machine vision systems for quality inspection, dimensional measurement, and automated optical inspection (AOI) lines. As production environments evolve and original units reach end-of-life or become difficult to source, engineering teams face the challenge of maintaining uptime without redesigning their entire vision architecture. This replacement and upgrade solution is engineered to address exactly that challenge — delivering a verified, compatible unit that slots into your existing system with minimal disruption.

Whether your facility is running a legacy CameraLink frame grabber, a dedicated vision controller, or an integrated inspection cell built around the Genie Series platform, the VA2-03-C11-1 replacement maintains full interface compatibility. The CameraLink Base configuration preserves your existing cable routing and frame grabber connections, meaning you do not need to replace your Matrox Solios, National Instruments PCIe-1427, or equivalent CameraLink acquisition card. The 26-pin MDR connector pinout is retained, and the camera’s power-over-connector design eliminates the need for separate power supply modifications in most standard installations.

From a software and programming perspective, the replacement unit supports the same GenICam-compliant interface and is compatible with Teledyne DALSA’s Sapera LT SDK, as well as third-party vision libraries including Halcon, VisionPro, and OpenCV-based pipelines. Existing camera configuration files, trigger timing parameters, exposure settings, and gain calibration profiles can be reloaded without modification. This dramatically reduces re-commissioning time on the production floor and allows your vision engineers to validate the replacement unit within a single shift rather than days of reprogramming.

Physical installation is equally straightforward. The VA2-03-C11-1 uses a standard C-mount lens interface, so your existing Computar, Kowa, or Fujinon fixed-focal or telecentric lenses remain fully compatible. The camera body dimensions conform to the Genie Series mechanical envelope, meaning existing mounting brackets, lens tubes, and enclosure cutouts require no modification. In space-constrained inspection stations or multi-camera gantry systems, this dimensional consistency is critical to avoiding costly mechanical rework.

For facilities managing broader vision system upgrades, this camera is commonly deployed alongside complementary components. Frame grabbers such as the Matrox Solios eA/XA or the Euresys Grablink Full are frequently paired with CameraLink cameras of this class. Lighting controllers, strobe drivers, and diffuse dome illuminators from brands like CCS or Effilux remain fully compatible with the camera’s trigger I/O interface. In multi-camera inspection lines, the VA2-03-C11-1 is often used in conjunction with Teledyne DALSA Genie Nano series cameras on adjacent inspection stations, allowing a mixed fleet to be managed under a unified Sapera acquisition framework. Power distribution panels and DIN-rail mounted 24VDC power supplies feeding the vision cabinet require no modification, as the camera’s power consumption profile is consistent with the original unit.

For systems integrating with PLC-based machine controllers — such as Siemens S7-1200, Allen-Bradley CompactLogix, or Mitsubishi iQ-R series — the camera’s hardware trigger input (opto-isolated, 5–24VDC compatible) interfaces directly with existing digital output modules without rewiring. This is particularly valuable in retrofit scenarios where the PLC program and I/O mapping are already validated and change management approval is required before any wiring modifications.

Procurement teams will find this replacement solution backed by a 12-month warranty covering manufacturing defects, sensor performance, and interface integrity. Each unit undergoes pre-shipment functional testing including live image capture verification, trigger response validation, and CameraLink signal integrity checks. Units are shipped from Xiamen with full ESD-protective packaging, and express logistics options are available to minimize line downtime. Stock availability is maintained for immediate dispatch, and partial order fulfillment is supported for multi-unit replacement programs.

Compatibility Comparison Table

Seamless Upgrade Solutions

A successful VA2-03-C11-1 replacement rarely involves the camera alone. In most retrofit and modernization projects, the surrounding vision system components must also be assessed for compatibility or upgraded in parallel. The Matrox Solios eA CameraLink frame grabber is the most common acquisition card paired with this camera class and remains fully supported. For facilities transitioning to PCIe-based acquisition, the Euresys Grablink Full or National Instruments PCIe-1427 are proven alternatives that maintain CameraLink Base compatibility.

Lens selection is equally important: C-mount lenses from Computar’s M series or Kowa’s LM series are widely used with the VA2-03-C11-1 and require no adaptation. In multi-camera inspection lines, Teledyne DALSA Genie Nano GigE cameras are frequently deployed on adjacent stations, and both camera families can be managed under the same Sapera acquisition environment, simplifying software architecture. CameraLink cables — particularly high-flex MDR-to-MDR assemblies from 3M or Intercon 1 — should be inspected and replaced as part of any camera swap to eliminate intermittent signal faults. Strobe controllers and LED illumination drivers with hardware trigger inputs compatible with the camera’s I/O interface round out a complete, validated replacement bill of materials.

Retrofit Guidance FAQ

Q: Will my existing CameraLink frame grabber work with this replacement unit?
A: Yes. The replacement unit uses the same CameraLink Base configuration and 26-pin MDR connector as the original VA2-03-C11-1. No frame grabber replacement or driver update is required in most cases.

Q: Do I need to rewrite my Sapera LT acquisition program?
A: No. The replacement unit is GenICam-compliant and recognized by Sapera LT using the same camera configuration file (CCF) as the original. Existing trigger, exposure, and gain parameters load without modification.

Q: Is the C-mount lens interface identical?
A: Yes. The C-mount flange distance and thread specification are identical, so existing lenses, spacers, and lens tubes are fully compatible.

Q: Can I trigger this camera from my existing PLC digital output?
A: Yes. The opto-isolated trigger input accepts 5–24VDC signals, compatible with standard PLC digital output modules from Siemens, Allen-Bradley, Mitsubishi, and Omron without additional signal conditioning.

Q: What is the lead time and shipping method?
A: Units are in stock and dispatched within 1–2 business days from Xiamen. Express air freight options (DHL, FedEx) are available for urgent replacement requirements.

Warranty Assurance

Every VA2-03-C11-1 replacement unit supplied by TOPNLMS is covered by a 12-month warranty from the date of shipment. Pre-shipment testing includes live image capture verification, CameraLink signal integrity validation, trigger I/O response testing, and visual inspection for physical integrity. In the event of a verified manufacturing defect or performance failure within the warranty period, TOPNLMS provides direct replacement support with priority dispatch. Our technical team is available to assist with installation verification, compatibility confirmation, and commissioning guidance. For volume procurement, extended warranty and consignment stock arrangements are available upon request.