Kollmorgen AKD-P00606-NBCC-I000 Replacement for AKD-P Series

Product Overview

Kollmorgen AKD-P00606-NBCC-I000 Replacement for AKD-P Series: Seamless Transition & Legacy System Compatibility

The Kollmorgen AKD-P00606-NBCC-I000 is a high-performance 6A panel-mount servo drive from the AKD-P Series, supporting EtherCAT and CANopen fieldbus protocols. As legacy motion control platforms age and OEM support windows close, industrial facilities running older Kollmorgen S200, S300, or AKD-B Series servo drives face increasing pressure to modernize — without disrupting production lines, rewiring control cabinets, or rewriting motion programs from scratch.

TOPNLMS supplies the AKD-P00606-NBCC-I000 as a direct replacement and upgrade solution for facilities transitioning from discontinued or end-of-life servo drive models. Whether your existing system uses resolver feedback, incremental encoders, or SFD (Smart Feedback Device) interfaces, the AKD-P Series is engineered to accommodate a broad range of feedback and communication configurations, significantly reducing retrofit complexity.

Compatibility Comparison Table

Seamless Upgrade Solutions

Migrating from a legacy servo system to the AKD-P00606-NBCC-I000 typically involves more than a single drive swap. A complete and reliable retrofit requires careful coordination of the surrounding control architecture. In most AKD-P Series installations, the drive operates within a broader Kollmorgen motion system that may include the AKD-P Series power supply module (shared DC bus configurations), AKD-B Series drives on adjacent axes, and Kollmorgen AKM Series servo motors — all of which maintain wiring and connector compatibility with the AKD-P platform.

For EtherCAT-based topologies, the AKD-P00606-NBCC-I000 integrates directly into EtherCAT ring or line networks managed by controllers such as the Kollmorgen AKD PDMM (Programmable Drive Multi-axis Master), eliminating the need for a separate motion controller in smaller systems. In facilities still running CANopen networks, the drive’s dual-protocol support allows a phased migration — maintaining CANopen communication while preparing infrastructure for EtherCAT expansion.

Wiring compatibility is a critical concern during any servo drive replacement. The AKD-P00606-NBCC-I000 uses the same X1 (AC power), X2 (motor power), and X10 (feedback) connector pinouts as the standard AKD platform, meaning existing Kollmorgen CFM motor cables and CFA feedback cables can typically be reused without modification. This dramatically reduces cabinet rewiring time and minimizes the risk of wiring errors during commissioning.

For systems requiring signal isolation between the servo drive and upstream PLC or DCS — particularly in environments with high electrical noise from VFDs or large contactors — inline signal isolators or terminal block modules (such as those from the Phoenix Contact FLKM or Weidmüller WDU series) are commonly installed on the I/O interface. These components protect the AKD-P’s digital inputs and analog reference signals from ground loops and transient interference.

In multi-axis control cabinets, the AKD-P00606-NBCC-I000 is often installed alongside Kollmorgen AKD-P Series regenerative resistors and shared DC bus capacitor modules, which are essential for managing regenerative energy in high-cycle or vertical-load applications. Proper sizing of these components during the upgrade process ensures thermal stability and prevents nuisance faults during deceleration.

For facilities using Kollmorgen KAS (Kollmorgen Automation Suite) or third-party PLCs (such as Beckhoff TwinCAT, Siemens S7, or Allen-Bradley ControlLogix with EtherCAT master cards), the AKD-P00606-NBCC-I000 is fully supported via standard EDS/ESI device description files, enabling rapid integration without custom driver development. Programming migration from legacy WorkBench projects is supported through Kollmorgen’s WorkBench import tools, preserving tuning parameters, motion profiles, and I/O assignments.

Retrofit Guidance FAQ

Q: Can I reuse my existing motor cables when replacing an AKD-B with the AKD-P00606-NBCC-I000?
A: In most cases, yes. The AKD-P Series uses the same X2 motor power and X10 feedback connector standards as the AKD-B platform. Verify cable shielding integrity and connector condition before reuse. Replace any cables showing insulation wear or connector corrosion.

Q: Is the EtherCAT node address configuration compatible with my existing network topology?
A: The AKD-P00606-NBCC-I000 supports EtherCAT node addressing via rotary switches and WorkBench configuration. It is compatible with standard EtherCAT masters including Beckhoff TwinCAT, Kollmorgen KAS, and any IEC 61158-compliant EtherCAT master. Node address conflicts from legacy CANopen node IDs do not carry over to EtherCAT configurations.

Q: What feedback devices are supported for direct replacement of resolver-based legacy drives?
A: The AKD-P00606-NBCC-I000 supports resolver feedback natively via the X10 interface. No additional feedback converter module is required when replacing resolver-based S200 or S300 series drives. For SFD or EnDat 2.2 feedback, ensure the motor’s feedback connector pinout matches the AKD-P X10 standard.

Q: How much panel space does the AKD-P00606-NBCC-I000 require compared to legacy models?
A: The AKD-P 6A variant occupies a standard AKD panel width of approximately 53mm. This is consistent with AKD-B 6A models, allowing direct physical replacement in existing control cabinet cutouts without panel modification in most installations.

Q: Can the drive be commissioned without a laptop running WorkBench?
A: Basic commissioning requires Kollmorgen WorkBench software connected via the X11 (USB) or X32 (Ethernet) service port. For facilities without on-site engineering resources, TOPNLMS can provide pre-configured drives with customer-specified parameters loaded prior to shipment upon request.

Q: What happens to my existing motion program when I replace the drive?
A: WorkBench project files (.wbp) from AKD-B or earlier AKD-P installations can be imported into the replacement drive. Tuning parameters, motion tasks, and I/O mappings are preserved. A full auto-tune cycle is recommended after installation to account for any mechanical differences in the new installation environment.

Warranty Assurance

Every Kollmorgen AKD-P00606-NBCC-I000 supplied by TOPNLMS is covered by a 12-month warranty from the date of shipment. Prior to dispatch, each unit undergoes functional verification including power-on self-test, communication interface check, and I/O continuity verification. Units are shipped in original or equivalent anti-static protective packaging with full documentation.

In the event of a confirmed defect within the warranty period, TOPNLMS provides replacement dispatch within 3 business days of fault confirmation. Our technical support team is available to assist with installation verification, fault code diagnosis, and commissioning guidance via email and phone. We maintain stock of AKD-P Series drives across multiple current ratings to support rapid cross-shipment in critical downtime situations.

For procurement teams, TOPNLMS issues formal quotations, proforma invoices, and commercial invoices with full HS code and country-of-origin documentation to support import clearance. Bulk orders for MRO (Maintenance, Repair & Operations) inventory programs are accommodated with lead-time commitments and reserved stock arrangements upon agreement.

All units are sourced through verified supply channels. TOPNLMS does not supply counterfeit, refurbished-as-new, or grey-market product. Certificate of conformity and traceability documentation are available upon request for quality-critical procurement processes.